This article will explain the Cisco UCS B-Series setup from the scratch . As you know that Cisco UCS is highly customizable and I have demonstrated one of the way of UCS deployment. This may vary for each environment but Cisco UCS beginners can use this article since it explains from where to start and end. […]
Cisco UCS
Cisco UCS – Configuring NTP and Configuration Backup
NTP configuration is essential for any operating systems to display the accurate time. Cisco UCS also requires instance-specific time zone setting and an NTP server to ensure the correct time display in Cisco UCS Manager. Prior to perform the NTP configuration , you must open a incoming port 123/UDP to Cisco UCS domain. This article will show […]
How to Configure Call Home Facility in Cisco UCS Manager ?
Cisco UCS manager provides facility to send email-based notification for critical system policies. There are multiple formats available which are compatible with pager services or XML-based automated parsing applications. Once you have configured this facility , system will send the automated alert to the pager if there is any issue. Using the smart home service future, Cisco support case […]
Cisco UCS – How to download Tech Support Files
You can easily download Tech support files from Cisco UCS manager . This file is required when you have open a case with Cisco for any issue. There are several different types of tech-support files that can be collected depending on which scope of the system needs more investigation. These support files generally contains the system generated […]
Create and associate service profile to UCS Blade
“Create and associate service profile to UCS blade” task is quite lengthy and time consuming work. That’s the reason why we have option for service profile templates . In the last article, we have seen the step by step procedure to create the service profile templates. Once the template is ready , it just matter of few […]
How to Create Service Profile Template on Cisco UCS ?
Service profile concept has been extracted from virtual machine and applying it for physical servers in UCS. When you configure VM , you need to specify LAN and SAN access, I/O configurations, firmware versions (Hardware version), boot order, network VLAN and physical port. Cisco Unified computing is going to allow the exactly same characteristics of VM […]
Cisco UCS – How to Create Boot & BIOS Policies ?
In Cisco UCS B-Series servers , you can configure multiple BIOS polices for same blade. But in the real world , we are not going to use the multiple BIOS policy for same blade. If you didn’t configure any BIOS policy , Blades will automatically take the default BIOS policy and it boots. If the configuration change […]
Cisco UCS – Creating vNIC & vHBA Templates
We need to define that how the vNIC will be get connected to the LAN. UCS manager will not create a VM-FEX port profile with the right settings automatically when you create a vNIC template. System must have MAC pool to create the vNIC template. Server pools must have two vNIC templates. One is going out the Fabric […]
Cisco UCS – Network Control policy and vLAN’s – vSAN’s
Cisco Discovery Protocol (CDP) is used to obtain protocol addresses of neighbouring devices and discover the platform of those devices. This protocol runs on all the Cisco manufactured devices like UCS blades, routers , switches etc. Once you have enabled the CDP protocols on the Cisco UCS , it sends the periodic messages, known as advertisements, to […]
Cisco UCS – How to Configure WWN Pools ?
In Cisco UCS domain , we need to create WWNN (World wide Node names) and WWPN (World Wide Port Names) manually to use the Fibre Channel vHBAs . World Wide Node Name is assigned to the blades and World Wide Port Name is assigned to vHBA (Virtual Host Bus adaptor). According to the cisco notes, A […]